UNIVICE Clamping Vice

UNIVICE Precision

UNIVICE High-pressure machine vices have a constant construction length for high precision parts on machining centers, for horizontal as well as for vertical use.
  • Body made of spheroidal graphite iron 
    GJS-600
  • Hardened and precision-grinded guideways
  • Longitudinal and transverse grooves 20 H7 for positioning on machine tables as well as two pass holes dia. 25 H7 for assembling UNILOCK Clamping knobs
  • Extra fine clamping force preselection
  • Double-sided connection threads for side stop
  • Step-jaws for large clamping width
  • Quick change system for additionally step-bars
  • Mechanic-hydraulic spindle, completely encapsulated, wear-resistant and maintenance-free
  • Thread-holes for fixation of pre-jaws (accessory)
  • Spindle is bayonet-mounted for a fast removing
  • Possibility for direct clamping with the provided operating key
  • Solid, exchangeable Cover plates
Ident. Nr.  Descritpion
UV100.010
 UNIVICE Precision 125, 445*140*126mm, Clamping force: 40kN
UV100.011
 UNIVICE Precision 160, 580x165x162mm, Clamping force: 60kN


UNIVICE Compact

Mechanical compact vice with pull-clamping-system and a patented clamping-with-adjustment (also available in pneumatic version).
  • Mechanical clamping force setup
  • Repeatable clamping force by using a torque wrench
  • Encapsulated spindle, dirt-resistant, no threads in chip areas
  • Patented quick-adjustment of the clamping width
  • Solid body made out of spheroidal graphite iron GJS-600
  • Compact construction design, constant construction length for machining centers
  • Large clamping width by using step-jaws
 
Ident. No.  Descritpion
UV100.012
 UNIVICE Compact, 400*125*100mm, Clamping force : 40kN at 105Nm


UNIVICE Compact 5S

Flexible, mechanic compact vice for 5-side operations as well as for clamping raw parts.
By using different jaws, the vice can be flexible adjusted on the work piece.
  • Compact construction design: perfect accessibility for 5-side machining
  • Mechanical clamping force setup
  • Repeatable clamping force by using a torque wrench
  • Re-clamping disk-spring, ideal for clamping with "grip"
  • Covered, encapsulated spindle, dirt-resistant, no threads in chip areas
  • Patented quick-adjustment of the clamping width
  • Solid body made out of spheroidal graphite iron 
    GJS-600
  • Compact construction design, constant construction length for machining centers
  • Large clamping width by using step-jaws
 
Ident. No. Description
UV100.013
 UNIVICE Compact 5S, 250*126*100mm, Clamping force : 40kN at 105Nm 


UNIVICE Syncro

Centric and single vice for 5-side machining. Versatile use on many machine centers.
  • Solid body made out of spheroidal graphite iron GJS-600
  • Patented jaw-quick-change-system
  • Step-jaws to "click-in"
  • Screw-mountable "grip"-bars
  • Perfect chip protection of the spindly by patented wipe technique
  • Orientation by longitudinal and transverse grooves as well as by moving-in systems
 
Ident. No. Description
UV100.014
 UNIVICE Syncro Centric, 240*99*80mm, Clamping force : 30kN at 115Nm
UV100.015
 UNIVICE Syncro Single, 240*99*80mm, Clamping force: 35kN at 80Nm
UV100.016
 UNIVICE Syncro Conversion kit from Single to Centric vice
UV100.017
 UNIVICE Syncro Conversion kit from Centric to Single vice


Applications
   
 


UNIVICE Accessories

For the best use of UNIVICE Clamping Vices, a wide jaw and accessory program is offered. A more precise description of the below accessories can be found in our catalog documents under "Downloads".

Ident. No. DescriptionUNIVICE
 Precision 
UNIVICE
 Compact 
UNIVICE
 Compact 5s 
UNIVICE
 Syncro  
UV100.030
Hand crank, standard version  160-200, 160*127mm (L*W)
 x   
UV100.031
Hand crank, short version  125-160, 110*90mm (L*W)
 x   
UV100.032
Hand crank, short version  200, 130*125mm (L*W)
 x   
UV100.033
Torque wrench 20-105Nm
  x x 
UV100.034
Operation key 100mm
    x
UV100.035
Jaw plain 125, step size 3*6mm, 12*39,2mm (W*H) 
 x x x 
UV100.036
Jaw plain 125, step size 5*10mm, 12*39,2mm (W*H)
 x x x 
UV100.037
Jaw plain 160, step size 5*8mm, 16*49,2mm (B*H)
 x   
UV100.038
Step-jaw fix,
Clamping width UNIVICE Compact: 10-350mm 
Clamping width UNIVICE Compact 5S: 0-166mm
   x 
UV100.039
Step-jaw, moveable 
Clamping width UNIVICE Compact: 10-350mm 
Clamping width UNIVICE Compact 5S: 0-166mm
   x 
UV100.040
Step-jaw small for enlarging the clamping width on fixed and moveable step-jaws
  x x 
UV100.041
Step-jaw wide for enlarging the clamping width on fixed and moveable step-jaws  
  x x 
UV100.042
Grip-bar HIGH for a better grip on work pieces on the steps (4.5 mm deep, 2.5 mm wide). Accessory to fixed and moveable step-jaws
  x x 
UV100.043
Grip-bar GRIP for a better grip on work pieces on the steps (4.5 mm deep, 2.5 mm wide). Accessory to fixed and moveable step-jaws
  x x 
UV100.044
Clamping jaw plain 125, 12*39,2mm (W*H)
 x x x 
UV100.045
Clamping jaw plain, soft, 125, 12*39,2mm (W*H)
 x x x 
UV100.046
Clamping jaw plain, soft, 160, 16*49,2mm (W*H)
 x   
UV100.047
Clamping jaw with longitudinal grooves 125, 12*39,2mm (W*H)
 x x x 
UV100.048
Clamping jaw with longitudinal grooves 160, 16*49,2mm (W*H)
 x   
UV100.049
Prism jaw 120°, 125, 39,2*20mm (L*W) 
Clamping diameter with 1 jaw: 9-50mm 
Clamping diameter with 2 jaws: 14-50mm
 x x  
UV100.050
Prism jaw 90°, 125, 39,2*28mm (L*W) 
Clamping diameter with 1 jaw: 15-42mm 
Clamping diameter with 2 jaws: 24-42mm
 x x  
UV100.051
Prism jaw 90 °, 160, 49,2*32mm (L*W) 
Clamping diameter with 1 jaw: 18-50mm 
Clamping diameter with 2 jaws: 28-50mm
 x   
UV100.052
Prism jaw, 100, dia. 17-100mm
    x
UV100.053
Pendulum jaw, 125, 39,2*43mm (L*W)
 x x  
UV100.054
Pendulum jaw, 160, 49,2*52mm (L*W)
 x   
UV100.055
Pendulum jaw with grooving and spring plate, 125, 40*80mm (L*W), 360˚
 x   
UV100.056
Pendulum jaw with grooving and spring plate, 160, 50*104mm (L*W), 360˚
 x   
UV100.057
Multi jaw fixed, Clamping width 10-185mm
  x x 
UV100.058
Multi jaw moveable, Clamping width 10-185mm
  x x 
UV100.059
Pendulum jaw for multi jaw moveable, for clamping of non-parallel work pieces, castings and moldings
  x x 
UV100.060
Pull-down-jaw 125, 39,2*25mm
 x  x  
UV100.061
Pull-down-jaw 160, 49,2*28mm
 x   
UV100.062
Pull-down-jaw with spring leaf, 125, 40*21mm
 x x x 
UV100.063
Pull-down-jaw with spring leaf, 160, 50*24mm
 x   
UV100.064
Universal-jaws 125, 42*10mm (W*H)
 x x x 
UV100.065
Universal-jaws 160, 52*10mm (W*H) 
 x   
UV100.066
Angle drive 125
 x   
UV100.067
Angle drive 160
 x   
UV100.068
Grip-bar 100-high side, clamped 2mm
    x
UV100.069
Grip-bar 100-step side, clamped 2mm
    x
UV100.070
Grip-bar 100-top, clamped 2mm
    x
UV100.071
Step-bar 125, 13*3mm (L*W)
 x x x 
UV100.072
Step-bar 125, 22*3mm (L*W)
 x x x 
UV100.073
Step-bar 125, 35*3mm (L*W)
 x x x 
UV100.074
Step-bar 125, 39*3mm (L*W)
 x x x  
UV100.075
Step-bar 125, 15*3mm (L*W)
 x x x  
UV100.076
Step-bar 160, 14*3mm (L*W) 
 x   
UV100.077
Step-bar 160, 30*3mm (L*W)
 x   
UV100.078
Step-bar 160, 44*3mm (L*W) 
 x   
UV100.079
Step-bar 100, 15mm (H)
    x
UV100.080
Step-bar 100, 35mm (H) 
    x
UV100.081
Work piece stop adjustable 125, thread M12
 x x x  
UV100.082
Console 100mm
    x