UNILOCK 5-Axis Reduction

The work piece or the device which has to be manufactured can be assembled with the help of reductions, work piece fixtures or clamping knobs. These interfaces can be chosen as required.

By using soft or hard Reduction adaptors it is possible to clamp work pieces with a limited supporting surface for a better work piece accessibility. The soft Reduction adaptors can be modified without problems for every requirement.


UNILOCK 5-Axis soft reductions 

Ident. No. Description
Dia.
Height
 Clamping knob type
 Mounting screw  
UL800.124
 Reduction H 50, SBA M16 80mm50mmSBA 40-25-5-16M12x100mm
UL800.125Reduction  H 50, SBB M16
80mm50mm SBB 40-25-5-16
M12x100mm
UL800.126Reduction  H 50, SBC M16
80mm50mm SBC 40-25-5-16 M12x100mm
UL800.121Reduction  H 25, SBA M16
80mm25mmSBA 40-25-5-16
M12x75mm
UL800.122
Reduction  H 25, SBB M1680mm25mm SBB 40-25-5-16
M12x75mm
UL800.123Reduction  H 25, SBC M1680mm25mmSBC 40-25-5-16
M12x75mm
UL800.118Reduction H 50, SBA M1280mm50mm SBA 40-25-5-12
M10x100mm
UL800.119
Reduction  H 50, SBB M1280mm 50mm SBB 40-25-5-12M10x100mm
UL800.120Reduction  H 50, SBC M1280mm50mm SBC 40-25-5-12M10x100mm
UL800.115Reduction  H 25, SBA M1280mm
25mm SBA 40-25-5-12 M10x75mm
UL800.116Reduction  H 25, SBB M1280mm
25mm SBB 40-25-5-12M10x75mm
UL800.117Reduction  H 25, SBC M1280mm
25mm SBC 40-25-5-12 M10x75mm


UNILOCK 5-Axis hard reductions

Ident. No. Description
Dia.
Height
 Clamping knob type
 Mounting screw  
UL800.109
 Reduction H 50, SBA M 16 80mm50mmSBA 40-25-5-16M12x100mm
UL800.110Reduction  H 50, SBB M 16
80mm50mm SBB 40-25-5-16
M12x100mm
UL800.111Reduction  H 50, SBC M16
80mm50mm SBC 40-25-5-16 M12x100mm
UL800.106Reduction  H 25, SBA M16
80mm25mmSBA 40-25-5-16
M12x75mm
UL800.107
Reduction  H 25, SBB M1680mm25mm SBB 40-25-5-16
M12x75mm
UL800.108Reduction  H 25, SBC M1680mm25mmSBC 40-25-5-16
M12x75mm
UL800.103Reduction  H 50, SBA M1280mm50mm SBA 40-25-5-12
M10x100mm
UL800.104
Reduction  H 50, SBB M1280mm 50mm SBB 40-25-5-12M10x100mm
UL800.105Reduction  H 50, SBC M1280mm50mm SBC 40-25-5-12M10x100mm
UL800.100Reduction  H 25, SBA M1280mm
25mm SBA 40-25-5-12 M10x75mm
UL800.101Reduction  H 25, SBB M1280mm
25mm SBB 40-25-5-12M10x75mm
UL800.102Reduction  H 25, SBC M1280mm
25mm SBC 40-25-5-12 M10x75mm