FIRSTCLAMP Clamper

This compact, modular and flexible clamper can be used for small as well as for large work pieces. Especially for 5-side machining this modular clamper brings significant benefits. Due to its very low clamping edge, the work piece can be almost completely machined. FIRSTCLAMP has as well as the UNILOCK products a high clamping force of 3 kN. Further on, its small construction helps for fast
re-setting-up on your machine centers.


Applications
   



FIRSTCLAMP clampers are made out of high-quality steel and are available in two versions:
  • Firstclamp 34, Grid 40/M12
  • Firstclamp 50, Grid 50/M16

FIRSTCLAMP Function


The claws of the narrow jaw stamp the work piece with a high turning moment. By a short opening and closing again of the clamping device. Raw materials, flame-cut- and saw-cut-parts are that way precisely clamped and not tensed up. The moveable FIRSTCLAMP jaws have further the ability to be installed reversed if they are rotated by 180 °. The mounting of the FIRSTCLAMP can be done through the clamping body as well as with an adaptor plate.




FIRSTCLAMP System 34

Ident. No. Description Length (mm)  Width (mm)   Height (mm)  Thread
FC700.000
FIRSTCLAMP 34 complete includes: 
Base unit 34*42*120mm with solid and flexible Claw-jaw, 2x Mounting screws, 1x Clamping screw M12
 136 34 45 -
FC700.001
FIRSTCLAMP 34 Base unit
 120 34 42 -
FC700.002
FIRSTCLAMP 34 Ground plate for grid 40/M12
 120 110 18 -
FC700.003
FIRSTCLAMP 34 Claw-jaw fixed, hardened and grinded
 16 34 45 M12
FC700.004
FIRSTCLAMP 34 Jaw fixed, grooved, hardened and grinded
 16 34 50 M12
FC700.005
FIRSTCLAMP 34  Claw jaw flexible, hardened and grinded
 40 10 3 M12
FC700.006
FIRSTCLAMP 34 Jaw flexible, grooved, hardened and grinded
 45 10 8 M12
FC700.107
FIRSTCLAMP 34, 4-fold extention kit (150mm, 250mm, 350mm, 450mm)
 150 - 450 - - M12


FIRSTCLAMP System 50

Ident. No. Description Length (mm)  Width (mm)   Height (mm)  Thread
FC700.100
FIRSTCLAMP 50 complete includes: 
Base unit 50*50*145mm with solid and flexible Claw-jaw, 2x Mounting screws, 1x Clamping screw M16
 145 50 50 -
FC700.101
FIRSTCLAMP 50 Base unit
 150 50 50 -
FC700.102
FIRSTCLAMP 50 Ground plate for grid 50/M16,
 120 134 30 -
FC700.103
FIRSTCLAMP 50 Claw-jaw fixed, hardened and grinded
 16 50 54 M16
FC700.104
FIRSTCLAMP 50 Jaw fixed, grooved, hardened and grinded
 16 50 65 M16
FC700.105
FIRSTCLAMP 50 Claw-jaw flexible, 
hardened and grinded
 54 18 3 M16
FC700.106
FIRSTCLAMP 50 Jaw flexible, grooved, hardened and grinded
 55 18 15 M16
FC700.107
FIRSTCLAMP 50, 4-fold extention kit (150mm, 250mm, 350mm, 450mm)
 150 - 450 - - M16