UNILOCK Clamping towers

Standard clamping towers with ROC Mineral cast

Our Clamping towers consist of a steel frame and are offered with a ROC mineral cast filling. This optimization generates advantages like 6-10 times better attenuation-attributes as grey iron, lower thermal conductivity as well as lower weight. The clamping devices which are mainly used in our Clamping towers are the proven EFM 138 Installation flange chuck, which are operated from the side. Mounting options for tombstone base plates are offered after customer requirements.

The defined standard inside micrometer between the EFM 138 Installation flange chucks is 200mm. But all UNILOCK Clamping towers are also available in other, customized dimensions.


UNILOCK Clamping Tower Types

Ident. No. Description
Amount of chucks
type EFM 138
LengthWidthHeight excl. ground plate 
Inside
  micrometer 
MG100.002
Clamping cross8 Stk 270mm 270mm 450mm 200mm
MG100.003 Clamping cross
12 Stk 270mm 270mm 650mm 200mm
MG100.004Clamping cube
8 Stk238mm   238mm  450mm 200mm
MG100.005Clamping cube
12 Stk 238mm 238mm 650mm 200mm
MG100.006
Double angle8 Stk 220mm 399mm 450mm 200mm
MG100.007Double angle 12 Stk 220mm 399mm 650mm 200mm
MG100.008Double angle 8 Stk 220mm 499mm 450mm 250mm
MG100.009Double angle 12 Stk 220mm 499mm 650mm 250mm

   



Standard clamping towers without ROC Mineral cast, for narrow constructions

For a narrow construction we offer a UNILOCK clamping tower with a base plate (height 36mm) made on request out of aluminum or steel and with two lateral steel sides. This versatile mounting tower has two air connections G 1/4 "with included ESM 138 Installation clamping chucks.


UNILOCK Clamping Tower Types 

Ident. No.Description
Amount of chucks
type ESM 138
LengthWidthHeight excl. ground plate 
Inside
mimcrometer  
UL500.074
DTL 2004 Stk270mm200mm464mm200mm





Grid clamping towers with ROC Mineral cast

As an alternative to conventional steel-grid towers we offer different sizes of grid towers made with ROC mineral cast. The Grid towers include position bushings (Dia. F7-12) with an M12 thread as well as a lifting screw and a base plate. The grid holes are ordered symmetrically over the center of the clamping body and are produced selectively in grid 40 or 50. In addition all grid tombstones are also offered with position bushings Dia. 16-F7 with an M16 thread suitable for grid 50.


innotool austria Grid Clamping Tower Types 

Ident. No. DescriptionLengthWidth Height  GridThread 
MG100.010
Grid clamping cross
 300mm 300mm  600mm  40mm M12
MG100.011
Grid clamping cross
 300mm  300mm  600mm  50mm M12
MG100.012
Grid clamping cross
 300mm  300mm  750mm  40mmM12
MG100.013
Grid clamping cross
 300mm  300mm  750mm  50mmM12
MG100.014
Grid clamping cube with steel cover
 300mm 300mm 600mm 40mm M12
MG100.015
Grid clamping cube with steel cover
 300mm 300mm 600mm50mm M12
MG100.016
Grid clamping cube with steel cover
 300mm 300mm 750mm 40mm M12
MG100.017
Grid clamping cube with steel cover
 300mm 300mm 750mm 50mm M12
MG100.018
Grid double angel with steel cover 
 400mm 200mm 600mm 40mm M12
MG100.019
Grid double angel with steel cover
 400mm   200mm  600mm 50mm M12
MG100.020
Grid double angel with steel cover
 400mm 200mm 750mm 40mm M12
MG100.021
Grid double angel with steel cover
 400mm 200mm750mm 50mm M12
MG100.022
Grid double angel with steel cover
 500mm 200mm 750mm 40mm M12
MG100.023
Grid double angel with steel cover
 500mm 200mm 750mm 50mm M12
MG100.024
Grid double angel with steel cover
 630mm  200mm  800mm 40mm M12
MG100.025
Grid double angel with steel cover
 630mm 200mm  800mm 50mm M12

   



Special clamping towers

For your specific requirements we also produce Clamping towers in special sizes and with your 
desired features. We are happy to support you with a proposal, tell us your requirements!