UNILOCK 5-Axis Clamping chucks

Structure

UNILOCK 5-Axis clamping chucks are divided in base and assembly chucks. Base chucks are mounted on the machine table and assembly chucks are used to raise the clamping height. If both elements are combined, different assembly heights can be achieved.

Applications
   
   


UNILOCK 5-Axis Base chucks

UNILOCK 5-Axis Clamping chucks can be mounted on 50/40/M12 grids, T-nut machine tables as well as on UNILOCK Zeropoint Clamping systems using UNILOCK Clamping knobs.


UNILOCK 5-Axis Base chuck types

Ident. No. Description
Dia.
Height
 Torsion
UL800.010
Base chuck H 7580mm75mm-
UL800.011Base chuck H 75, V
80mm75mm10h7
UL800.012Base chuck H 100, V
80mm100mm 10h7
UL800.013Base chuck H 100
80mm100mm -
UL800.018
Base chuck H 12580mm125mm -
UL800.019Base chuck H 15080mm150mm-
UL800.020Base chuck H 17580mm175mm-

   



UNILOCK 5-Axis Base chucks with double manual clamping

UNILOCK 5-Axis Base chucks with double manual clamping with a height of 125mm have two interfaces respectively mounting possibilities of a UNILOCK Clamping knob. From the top as well as from the bottom. This Base chuck could be your universal interface between machine table and work piece.


UNILOCK 5-Axis Base chuck types with double manual clamping

Ident. No. Description
Dia.
Height
 Torsion
UL800.014
 Base chuck with double manual clamping H 125 80mm125mm-
UL800.015 Base chuck with double manual clamping incl. indexing H 125,V 
80mm125mm10h7

   


UNILOCK 5-Axis Assembly chucks

UNILOCK 5-Axis Assembly chucks are used as a raising on Base chucks. The Assembly chuck with a height of 75mm is also available with indexing 10h7. By building up different chuck types, work pieces which are difficult to access or which have different heights are easy to clamp.


UNILOCK 5-Axis Assembly chuck types

Ident. No. Description
Dia.
Height
 Torsion
UL800.030
Assembly chuck H 7580mm75mm-
UL800.035Assembly chuck H 75
80mm75mm10h7
UL800.031Assembly chuck H 100
80mm100mm -
UL800.032Assembly chuck H 125
80mm125mm -

   


UNILOCK 5-Axis Assembly chuck, pneumatic

The pneumatic UNILOCK 5-Axis Assembly chuck is used as a raising on Base chucks and is available with a height of 75mm. In case of serial production, a higher work piece change comfort is given by using the pneumatic version.


UNILOCK 5-Axis Assembly chuck, pneumatic

Ident. No. Description
Dia.
Height
 Torsion
UL800.033
 Assembly chuck with pneumatic operation80mm75mm-

   


UNILOCK 5-Axis Mounting and raising accessories

As support for UNILOCK 5-Axis base and advanced chucks we offer different base-feets and heightenings. They can be used as a strong foundation for the use of UNILOCK 5-Axis Base and Assembly chucks and can be mounted on all machine tables with max. 18mm screws or with big hole grids without using mounting clamps. Contact us, we would like to consult you with the right UNILOCK 5-Axis elements.