UNILOCK Clamping chucks

Structure

Our UNILOCK chucks are divided into two main areas. Chucks developed for installation and chucks devolped for assembling. Each UNILOCK chuck is designed for a specific application to efficiently serve the diverse needs.


Installation Clamping chucks

The orientation of UNILOCK Installation clamping chucks is handled over the centering collar. They are suitable for partial or full installation. All these chucks have integrated mounting holes.
  

UNILOCK Installation Chuck Types

Ident. No. Description
Dia.
LengthWidthAssembly Height

Installation
Height

Air
Connection
Turbo 
UL500.009
ESM 138  138mm- -  39mm 15,7mm G 1/8“-
UL500.024 EFM 138
 138mm - -  11mm 49,0mm  O-Ring x
UL500.001ESM 176
  176mm - - 39mm  20,8mm G 1/8“x
UL500.542 HSM 196
 196mm - -  39mm  25,8mm G 1/8“
-
UL500.045
ESM 100-75  - 100mm 75mm 39mm  29,8mm G 1/8“x


Applications
   
   


Assembly Clamping chucks

The orientation of UNILOCK Assembly clamping chucks is handled over pass borehole and cylinder pin. They can be assembled on all general devices and grid plates. These chucks are mounted with the help of clamps.
                                                         

UNILOCK Assembly Clamping Chuck Types

Ident. No. Description
Dia.
LenghtWidthAssembly Height
Installation 
Height
Air
Connection
Turbo 
UL500.000
MSM 170  170mm- - 65mm - G 1/8“-
UL500.028ASM 120
 120mm - - 56mm - G 1/8“ -
UL500.038ASM 90
  190mm - -60mm  - G 1/8“x
UL500.803ASH 120
 120mm - - 56mm - -
-
UL500.860
ASH 185  185mm--55mm  - --
UL500.805 AFM 105-65 - 105mm 65mm 65mm140mmG 1/8“
x
UL500.083 EDB 100-150 - 100mm 150mm 39mm  -G 1/8“ x
UL500.807AFM 146 - 146mm 120mm 46mm  -G 1/8“ x
UL500.808 ISM 160 V 162mm46mm  -G 1/8“ x


Applications